Home Alclad II White Primer and Microfiller, 4 oz (120 ml)

Alclad II White Primer and Microfiller, 4 oz (120 ml)

Vendor: Vendor: Alclad II
Barcode: 853328003068
Sale price $14.96
Out of stock
Add to Wishlist

Guaranteed Safe Checkout

Visa
PayPal
Mastercard
American Express
Discover
  • Primer and Filler: White Primer and Microfiller fills fine sanding scratches and small surface flaws while priming the model.
  • Base for Regular Metals: It is a recommended base coat for the Alclad II Regular metal finishes.
  • Sand and Polish: Lightly polish it with fine wet-and-dry paper before spraying the metal coats.
  • Airbrush Ready: Supplied ready to spray in a 4 oz (120 ml) bottle.
  • Flammable Solvent-Based Paint: Spray in a booth or well-ventilated area, wear a respirator and keep away from heat and flame.


Alclad II White Primer and Microfiller is a 4 oz (120 ml) airbrush primer that fills fine sanding scratches and small surface flaws on scale models. Suits colours that need a light under-base. It is a recommended base for the Alclad II Regular metal finishes; a primer is needed on injection plastic kits because Regular Alclad is about as strong as lacquer car paint and can craze bare polystyrene. Lightly polish the primer with 1000 to 1200 grade wet-and-dry paper before spraying the metal coats, and make sure the surface is free of dust and grease. It dries almost instantly and can be masked over after about 10 minutes. Clean the airbrush with lacquer thinner or Alclad airbrush cleaner. This is a solvent-based lacquer: spray in a booth or a well-ventilated area, wear a mask or respirator and keep it away from heat and flame.