Alclad II Copper Lacquer Paint, 1 oz (30 ml)
Proveedor: Proveedor:
Alclad II
Pago seguro garantizado
- Copper Metal Finish: A Regular Alclad II finish described as soft, fine-grained copper for things like sailing-ship hulls and copper fittings; can be mixed with other Alclad colours.
- Regular Range: Spray it over a primer such as Alclad II Grey, White or Black Primer and Microfiller.
- Airbrush Ready: It is pre-thinned for airbrush use only; spray at 12 to 15 psi from 2 to 3 inches and do not thin it.
- Mask and Paint Over: Regular finishes dry almost instantly, can be masked after about 10 minutes and can be painted over with acrylics or enamels.
- Flammable Solvent-Based Paint: Spray in a booth or well-ventilated area, wear a respirator and keep away from heat and flame.
Alclad II Copper is a lacquer-based metal finish for scale models, supplied pre-thinned in a 1 oz (30 ml) bottle for airbrush use. It is soft, fine-grained copper for things like sailing-ship hulls and copper fittings; can be mixed with other Alclad colours. As a Regular finish, it goes over a primer such as Alclad II Grey, White or Black Primer and Microfiller, and a primer is needed on injection plastic kits. It is supplied pre-thinned for airbrush use only; do not brush it on and do not thin it. The maker recommends spraying at 12 to 15 psi with the airbrush 2 to 3 inches from the surface, working in a narrow to medium fan. It dries almost instantly and can be masked over after about 10 minutes.
