Alclad II Chrome for Lexan Lacquer Paint, 1 oz (30 ml)
Proveedor: Proveedor:
Alclad II
Pago seguro garantizado
- Chrome for Lexan Metal Finish: A High Shine Alclad II finish described as high Shine chrome for clear polycarbonate (Lexan) R/C bodies.
- High Shine Range: Spray it over a glossy base such as Alclad II Gloss Black Base, which gives the strongest mirror effect.
- Airbrush Ready: It is pre-thinned for airbrush use only; spray at 12 to 15 psi from 2 to 3 inches and do not thin it.
- Handle With Care: Seal High Shine finishes with a water-based clear if they will be handled; decal solutions are not recommended on them.
- Flammable Solvent-Based Paint: Spray in a booth or well-ventilated area, wear a respirator and keep away from heat and flame.
Alclad II Chrome for Lexan is a lacquer-based metal finish for scale models and clear Lexan R/C bodies, supplied pre-thinned in a 1 oz (30 ml) bottle for airbrush use. Chrome for Lexan is sprayed on the inside of a clear polycarbonate body shell in two or three light coats and then backed with black or silver paint. As a High Shine finish, it needs a glossy base: Alclad II Gloss Black Base gives the strongest mirror effect, and Clear Base also works. It is supplied pre-thinned for airbrush use only; do not brush it on and do not thin it. The maker recommends spraying at 12 to 15 psi with the airbrush 2 to 3 inches from the surface, working in a narrow to medium fan. It dries almost instantly and can be masked over after about 10 minutes.
